Project Playhouse

IMG_20160513_162113 20160519_181908 20160519_145727 20160519_145634

Ever since we moved into our house, I had wanted a play set for the kids. It was high on my priority list. Like top spot. Unfortunately, part of buying an old fixer-upper house meant that there were SOOO MANYYYY other projects that ended up taking priority over the play set. So here we were this past winter, over 2 years after moving in, discussing putting a play set in the yard. Again.

Me: “If I can’t get the kids some kind of play set this year, I will just die. Literally be dead. Can we please make this happen come spring? I have waited to long!”

Cody: “If you stop talking to me about it, then yes, this spring we will figure something out.”

So anybody that knows me knows that after getting this half-hearted yes from my husband, I basically became a play set architect. I immediately hit the internet and started shopping for play sets. I looked at hundreds. Kits you order online, kits you can pick up in store, kits that get delivered pre-assembled, kits that include lumber and kits that didn’t include lumber. I became an expert on pricing out slides and attachments. I spent every single second of my spare time comparing kits and pricing out lumber options. However, after days of shopping, I was just plain old disappointed. These play set kits were:

  1. BORINGGGG. Everybody I know has the basic one in their yard. I couldn’t even think about having a typical, standard play set.
  2. WAYYY TOOOOO EXPENSIVE. So the ones that weren’t boring and standard? Yea they cost way too much money. I’m talking thousands of dollars. So F that.
  3. Came with a beam for swings, which we didn’t need! We have a HUGE tree in our yard, and the first thing I made Cody do after we moved it was figure out how to hang tree swings. They kick ass, swing super-high and make every other swing on the planet look weak.

After this brutal disappointment, I had to go back to Cody and tell him my findings. We decided there was only one way to make this happen. Some good, old-fashioned DIY! (Which we love by the way. I blame HGTV and the DIY Channel. We are such suckers for anything DIY.) So with the full go-ahead from my project foreman, I hit Pinterest like was my full-time job, searching for inspiration. I pinned and pinned on my board “Outdoor Childhood”. (If you don’t follow me on Pinterest and Instagram, then you should! It will make your life better. Cross my heart.) Then I stumbled across this pin from Bella Cupcakes Blog. It took me to a post about this magical playhouse they made for their daughter, and I was so enchanted. After a few more searches on Pinterest, I found even more playhouses that just stuck in my mind. I couldn’t stop thinking about building this for the girls. I literally lay awake at night designing and decorating this playhouse in my head. It is safe to say, I became freaking obsessed with the idea of a playhouse for the girls. Any thoughts and dreams I once had of a standard play set were long gone.

POOF. Out the window.

The playhouse of my dreams (ahem, my daughter’s dreams…) was going to be built ASAP, or I was going to self-combust with creative energy that I had nowhere to channel.

I showed Cody all my pins from Pinterest, we picked a spot in the yard after HOURS of deliberations and Cody sketched out plans. We headed to the hardware store, with nothing but a hope and a wish that this thing would come together. After doing some research at the store, we came home and wrote up our plan. We guessed our supplies were going to cost somewhere in the $600-$700 range, which was music to my ears! Full steam ahead, Project Playhouse! Cody went and purchased the lumber and supplies that weekend, and we got started.

We decided on a location in the far right corner of our yard, and chose to build the playhouse in a lean-to style against an existing shed. This area was basically a corner of the yard that went unused most of the time, so having the playhouse there would tuck it out-of-the-way, without taking up any already usable space. Cody measured everything out, set some 4×4 posts in the ground and we were in deep! Too late to turn back now!20160409_144020After setting the posts, Cody built a sub-floor. Then he cut the posts so everything was level. The gray wall on the left of the picture is the wall of the existing shed.

20160416_145246The sub-floor was 6 feet wide by 10 feet long, so he put down 6′ x 8′ plywood to make the floor of the house. The 2 front feet of the sub-floor was left open because it was going to eventually become a front porch! I love the picture below, because Avery was so excited this project started. I asked her what she was doing and she said, “I’m just gonna watch Dad finish my playhouse.” (Poor kid. Due to the rainiest, coldest spring EVER, it would be 4 weeks from when this pic was taken before this thing would be finished.)

Framing up the walls….

And once the walls were framed, Cody installed plywood sheeting as the base for the roof. (Note the horseshoe pit in front of the playhouse, because it eventually, magically turns into a huge sandbox! Wait for it….wait for it….) We hung some sheets of cheap hardboard siding to make the walls of the playhouse. I helped. I got splinters. I cried. Cody tried to kill me. Just another day in DIY bliss! This was the point in the project in which people who I showed this to thought we were crazy, and maybe thought we were creating a giant eyesore in our yard. Nobody EVER trusts my visions! Have faith, people! It gets SOOO MUCH better!So now that the walls were up, it was time to cut holes for windows. And then install working windows with screens. Because screens help keep out bugs, and bugs ruin playhouse fun with their disgusting existence. So rolling his eyes through it all, Cody agreed to 3 of these 18″ x 24″ shed windows we got on sale at Menard’s for $25 each.20160417_190119They really open and close, and are just all-around perfect and awesome. The kids are obsessed with them. (I am too!) Avery was clearly very excited that day!Then it was time to build the front porch and the railing, which came out pretty cute, if I do say so myself! We used some deck boards for the porch floor that we had left over from when we built our actual deck last year. Cody made the railing out of some pressure treated 2x4s and a few deck spindles that we got at Menard’s for $0.74 each. He also installed the shingles on the roof. We used up our leftover tar paper and shingles from when we re-roofed our covered porch, so even though we had purchased these previously, the shingles cost nothing out-of-pocket for this project. I was so glad to get that random pile of shingles out of my life! Then he framed the windows and ran a few pieces of outdoor composite trim along the roof line to keep everything looking clean.
Once some trim was hung, Cody built the doors. I saw a lot of playhouses on Pinterest with cute, little, child-sized doors, but I insisted on a full-sized double-hung door. I am SO HAPPY with how it came out. The girls can open the top half and let in some light and air, but still be able to close the bottom half and play pretend to their hearts’ content. It also makes it much easier for adults to be able to access the playhouse, since the doorway is full-sized.

20160506_140404So once the structure of the outside was coming together, it was time to get the inside going. I REALLY wanted a loft on the inside. Somewhere the girls could put baby dolls to sleep, read a book, just hide out and do top-secret girl stuff. Cody agreed (YAY!) that a loft could definitely increase the cool factor, and got to work building one.

Once the platform for the loft was finished, he built a ladder out of 2×4 scraps and installed a railing along the side. Our little Emmy LOVES slides, and was desperate for us to come up with a way to give her playhouse a slide. I didn’t think it would be possible, but Cody came up with a way! Dad of the Year Award Nominee! See that hole in the back side of the playhouse from the loft? Yup. That’s a slide.

Below is the view from the back! Emmy’s very own slide getaway! We lucked out on the slide, and found it at a Habitat For Humanity ReStore for $30.00! (If you aren’t familiar with ReStore, it is a thrift store for furniture, building supplies and home furnishings. I highly suggest stopping in to your local ReStore if you are into refinishing furniture or DIY projects!) That exact slide retails at $200.00 from the big chain hardware stores. I got it brand new, in box, in perfect condition, for $30.00. I love it when thrifting pays off!So now that the construction was starting to wrap up, it was time for me to go nuts. I literally vomited every ounce of creative energy I had stored up this winter all over this project. It was glorious. Step one: paint.20160506_141831The girls and I picked out a perfect Tiffany Blue, changed into painting clothes and got to work! They were over the moon to be let loose with real paint on their real playhouse!20160506_150029I barely had to do any work! Might as well enjoy a cold one while I wait for these kids to get the job done…..20160506_173723While I got my buzz on and the kids painted, Cody was hard at work converting the old horseshoe pit into a big sandbox. Remember how I told you to wait for it?! Here it is!20160507_151929He also used the timbers from the dissembled opposite pit to make a border edge for the play area. We knew we wanted to have mulch in the play area since our shade grass doesn’t hold up to high traffic.20160507_153955We lay some pavers down in a hopscotch pattern to make a fun little path for the girls as they made their way from the slide in back to the sandbox/front porch area. 20160507_151956Cody also built a cute little door for the slide exit, which was no easy task! I was so impressed! The bottom of the door flips up so it can open/close over the top of the slide, then flips back down to keep out animals and weather. It really is pretty genius. 20160507_162122Then the whole play area got mulched. We used 10 bags of mulch total, and they were on sale for $2.00/bag at Menard’s. We also bought the pavers there for $1.00 each. So the total we spent on landscaping for this project was right about $30.00. I think it was worth every penny, and then some!20160511_191653Since I wanted the whole backyard to feel cohesive, I used the same stain we used on our deck that we built last year to stain the girls’ front porch, the doors and the landscape timbers.20160511_191713Then I carried the stain inside the playhouse on the ladder and the beam for the loft. I figured the stain would hold up to traffic on the ladder much better than paint. Fun little tidbit: At this point, I kept the girls out of the playhouse so that I could finish decorating it. We let them back in a few days later once everything was finished, so that it could be a surprise!20160518_150929They weren’t too disappointed to be kept out for a while, since they got to lend a hand in refinishing some salvaged furniture for the inside. 🙂20160518_162149I painted the ceiling with some exterior paint in bright white, and painted all the walls with some interior/exterior recycled paint (It’s called “Everybody’s Paint” – and I have to say, I was surprised by how much I loved it! Click the link if you want details.) I found it at the ReStore last year for only $10.00 a gallon. I had come across a can that was the perfect shade of warm white, so I grabbed it thinking I would definitely find something to use it on. Turns out I was right! Another thrift shop payoff! Then I got out of Cody’s way so he could put down some cheap outdoor carpets. The total cost of the carpet and the installation tape was $40.00 at Menard’s. Here is a view of the loft area.

20160518_162217To finish up the outside of the house and play area, I spray painted the hopscotch numbers on the path along the side of the house while Cody added benches to the sides of the new sandbox. Then all the trim got a fresh coat of bright white to tie in to the trim on our shed and actual house. You will get to see it below in the finished pictures!

20160514_184959The girls and I also spent a rainy day making these AWESOME signs for the playhouse out of some scrap wood leftover from the playhouse construction. Look for them in the finished pictures! They turned out so cute!

20160512_153243Once the outside was finished, I FINALLY got to pull out the bag of cheap decor the girls and I had been working on. Over the past few months, every time we visited a store we would check the clearance sections for cheap playhouse decor. We also had some good luck at dollar stores. I had built up quite a collection! I was thrilled to be able to put our bag of stuff to use! I had also decided to pull some toys from our house and turn them into playhouse toys. It was great to clear out some toy storage space.20160519_145738I painted the railing of the loft the same teal blue as the siding. We grabbed these cute frames at Ikea for $1 each. The popsicle pictures came in a pack of 5 for $6. So this decor cost me $11. Not too shabby! 20160519_144308This mini-kitchen used to be in a corner of Avery’s bedroom, but we are in the process of converting her room to be a little more “big kid”. It made perfect sense to get this out of there and install a nice kitchen into their playhouse.

20160519_151108This bookshelf was given to us free. Avery and I refinished it with some Amy Howard One Step Chalk Paint (Find it at your local Ace Hardware! It’s my favorite chalk paint for refinishing furniture!) in Graphite, and then glazed it with pale pink. It turned out super cute! All the dishes, picnic baskets and play food in the picture were also in Avery’s room with the mini-kitchen, so they moved out to the playhouse as well. I got those 3 adorable buckets on the bottom shelf at a consignment sale for 75 cents each!20160519_144338This old table was given to us for free, but was in awful shape. We tightened up all the legs with some new screws, sanded the spots where it was peeling, and then refinished it with the same process as the bookshelf. It also turned out awesome! The stools were from Ikea for $7 each. The centerpiece and little garden sign above it were each $2 at Walmart’s spring clearance. The tea set and cookie set we already had. The little teal blue placemats were part of the centerpieces at my wedding, and I was happy to find use for them in the playhouse for tea parties! The rug was a scrap Cody cut from the outdoor carpet he installed in the playhouse. I had 2 cans of spray paint (one teal and one sky blue) that I had used for other projects around the house. I used the last of them to make an ombre effect on the scrap of rug. Totally worth the effort! I love it!20160519_144259The popcorn vacuum, broom set, baby doll diaper bag, apron and chef hat also came from that little corner of Avery’s room. They all get much more use out here. Those little wooden hooks were in our baby nursery, but don’t match either of the girls rooms now. I’m glad I held onto them because they look perfect in the playhouse!20160519_144326The 3 windows have tension rods from Walmart that were $3 apiece. The curtains were originally in my kitchen. They are the Ikea LILL Lace curtains. You can get the pair for $5, and then cut them to the size of your window. I bought a fresh pair for my kitchen, and then cut the old ones to fit the girls’ windows. The pink sashes are scraps of leftover material from when I made curtains for Emmy’s bedroom windows.

20160519_145634The 3 paper lanterns were from Deals for $1 each. I just hung them from the same hook at different heights for a chandelier effect. The butterfly and dragonfly above the windows were each from Walmart’s spring clearance for $4 each. The little doll bassinet was from a garage sale for $5. The mini rocking chair was from ReStore for $10. I originally planned on refinishing it, but the teal seat and dark wood already matched the playhouse perfectly. All I did was dust it off and plop it in a corner!20160519_145655The loft area got a little fairy wall sticker from Deals for $1. The blankets are just a few old ones from the house. The girls use them to make doll beds or put them in the grass in the yard for pretend picnics. The 2 flower pillows were from Walmart’s patio section for $5 each. The White Sox pillow we already had inside, but we needed to represent Chicago’s south side in our playhouse somehow, so it is proudly displayed out there now. Go Go White Sox! 😉20160519_145727Once we finished the inside of the playhouse, we let the girls loose to take it all in! They were over the moon! Emmy said, “MOMMA! This is making me so happy! SOOO HAPPY!” I would definitely call it a success!20160519_202124 20160519_181925Last but not least, I let the girls add the finishing touches we picked out for the outside. We hung the “Run Wild My Child” sign we made on the back wall, and found a good spot for the windmills ($7 each on sale at Menard’s) and pink flamingos (Set of 2 for $7 on sale at Menard’s) that girls picked out to spruce up the back of the playhouse. 20160519_181908 IMG_20160513_162113The front was finished up with the “PLAYHOUSE” sign we made, 2 FARGGLAD chairs from Ikea for $15 each and a little terracotta planter pot we already had with a sweet potato vine.

The total cost of this project came in at just under $800.00. That includes everything – building and landscaping materials, paint, furniture, decor, etc. I am thrilled about it, because not only is it perfectly custom and adorable, but it is HALF of what we would have spent ordering a play set kit! We did luck out in having some supplies on hand from other projects, but that is part of what makes every DIY project so awesome!

Now if this ain’t the playhouse of every kid’s (and parent’s!) dreams, I don’t know what is! Good times ahead for us this summer! 🙂

20160519_14563420160519_145727IMG_20160513_16211320160519_181908

Make Your Own “Minion” Party Hats!

When Emmy told me she wanted a “Despicable Me” birthday party, I immediately hopped on Pinterest to get ideas. Scrolling through my happy place, I stumbled across this pin from Tidbits and Twine. I obviously freaked out inside, and decided then and there that I would have minion hats at this party. This party would not even happen without these hats. I literally envisioned every future party moment with kids wearing these hats. It was happening. The crazy-craft-lady-train had left the station and wasn’t returning until it was chock-full of minion hats.

Kait phone 73115 094

It took a few hours of my life, some yellow construction party hats  and a few craft supplies – but it was sooooo worth it to make these! The kids (And even some of the grown-ups!) went crazy for these hats. Many of our party guests still have them two months later. My own girls still have their two hats in dress-up rotation, and I have to admit, I am shocked how well they actually held up!

I definitely think you should consider making a few of these if a minion party is in your future!  Here’s how:


How To Make Your Own “Minion” Party Hats

Kait phone 73115 026

Step 1:  Gather your supplies! You will need:

  • Plastic yellow construction party hats
  • Mason jar lids
  • Black pipe cleaners
  • Black electrical tape
  • White poster board
  • Black construction paper
  • Craft glue or Elmer’s glue
  • Hot glue gun/hot glue sticks
  • Scissors
  • 1 quarter
  • Pencil

Step 2: Prep your eyeballs. 🙂

Kait phone 73115 036

To make the pupils of the eyes, trace a quarter as many times as needed (You need 1 black circle per hat.) onto the black construction paper. Cut out the circles with some scissors. (You can fold the paper in half to get it done in half the time!)

Kait phone 73115 032

Trace your mason jar lid as many times as needed (You need 1 white circle per hat.) onto the white poster board. Cut out the circles with some scissors.

Step 3: Assemble the eyeballs!

Kait phone 73115 043

Get your white circles, black circles and mason jar lids together.

Kait phone 73115 051

Use the craft glue to glue the white poster board circles onto the mason jar lids.

Kait phone 73115 046

Then glue on the black construction paper circles.

Step 4: Put on the Minion goggles.

Kait phone 73115 039

Plug in the hot glue gun, then get your mason jar rings back from the over-excited children that stole them.

Kait phone 73115 049

Put a thin bead of hot glue around the inner lip of the ring and push the mason-jar-lid-turned-eyeball into it. Presto minion goggle eyes!

Step 5: Give your minions hair.

I decided to do Stuart’s hair and Kevin’s hair. We will start with Kevin.Kait phone 73115 067

For Kevin, use a sharp knife to cut 2 holes into the raised, center part on the top of the construction hat.

Kait phone 73115 060

Feed 4 pipe cleaners into one hole and back out the other, so that the hair is sticking out the top of the hat.

Kait phone 73115 061

The inside of the hat will look like the above picture, with the hair poking out the top of the hat.

Kait phone 73115 062

Trim the pipe cleaners to the desired length, and arrange into Kevin’s style!

Kait phone 73115 055

For Stuart, use a sharp knife to cut 2 holes on the top center of the hat, parallel to the raised, center part of the hat. Feed the pipe cleaners in one side and back out the other side.

Kait phone 73115 066

Cut to the desired length and bend into the Stuart style.

Kait phone 73115 068

Look how cute they are already! Eeee!

Step 6: Finish them up!

Kait phone 73115 071

Grab the eyeball goggles we made earlier, black electric tape, scissors and your hats with hair.

Kait phone 73115 081

Start by adhering your electric tape really well to one the side of the mason jar ring.

Kait phone 73115 073

Apply the tape around the side of the hat. This makes the band for the minion goggles, while also holding the eyeball in place.

Kait phone 73115 084

Run the tape around the whole hat. You don’t need to hold the eyeball in place while you tape around the whole hat.

Kait phone 73115 085

Cut the tape once it is wrapped around the whole hat, leaving enough extra to attach to the other side of the mason jar lid.

Kait phone 73115 092

Once you have attached the eyeball in place with the other side of tape, trim any excess tape off the ends and smooth it down.

Kait phone 73115 095Kait phone 73115 097

Put a thin line of hot glue on the top and bottom of the mason jar lid, right where it sits on the hat. This will help hold your eyeball in place, in addition to the tape.

Kait phone 73115 238

There you go! Minion hats. Boom. Done.


Now all you have to do is throw your party, and watch the kids go nuts!Kait phone 73115 239 Party time!

🙂 Kaitlyn

 

Gru’s Shrunken Moon Cake Pops For A “Despicable Me” Party!

So anybody who has seen “Despicable Me” knows all about Gru’s mission to steal the moon. If you are not familiar – In order to steal the moon, Gru has to obtain a shrink ray and shrink the moon so that he can fit it in his pocket.

Emmy watches this movie at least once a week, and is now obsessed with the moon. She looks for it in the sky night and day, and stares at it in one of Avery’s books about the solar system. She also pretends a little plastic golf ball is her moon and carries it in her pocket.

(She is such a little weirdo, and I just love it! She flies her freak flag with no cares. Hey kid, what’s in your pocket? THE MOON. Obviously.)

So when I was searching Pinterest for “Despicable Me” party ideas, I came across this pin with a picture of shrunken moon pops. I knew I had to serve these up at Emmy’s party, because she is my little moon-obsessed minion wannabe!

I used my usual cake pop recipe, with chocolate cake on the inside and a white candy coating on the outside. It gave the pops a very moon-like look.

Read on to make your own shrunken moon cake pops!


Gru’s Shrunken Moon Cake Pops For A “Despicable Me” Party!

Ingredients:

  • 1  box chocolate cake mix, prepared and baked according to the box directions.
  • 1  8 oz block of cream cheese, softened at room temperature
  • 2  packages of Wilton candy melts in white
  • 1  package of lollipop sticks

What to do:

Grab your box of chocolate cake mix. Any brand will do. I used this one:

?

Prepare the mix according to the box directions and bake the cake.

?

Once the cake is baked, allow it too cool COMPLETELY before you move on to the next step.

?

Dump about 2/3 of the baked, cooled cake into the bowl of a mixer with a paddle attachment.

?

Add the block of softened cream cheese.

?

Mix on low until it all starts to come together.

?

Crumble the remaining 1/3 of your cake slowly into the mixing bowl. Continue to mix on low until the mixture resembles a crumbly play dough.

?

Line a cookie sheet with parchment paper.

?
(Oh hey, Fitbit-on-my-wrist! So glad you made it into this post about cake mixed with cream cheese and dipped in candy.)

Grab small handfuls of the chocolate cake dough and roll them between your hands to make balls. About 1 inch diameter for size seems to work well.

?

Once you have them all rolled, grab your lollipop sticks.

?
I got mine at Walmart, but you can also find them in most craft supply stores.

Poke a lollipop stick into each ball, about 3/4 of the way in. (You do not want them to poke through the other side, because your cake pops will fall apart when it is time to dip them in the candy coating.) Once they all have lollipop sticks, put them in the fridge for a few minutes while you prepare the candy coating.

?

Now grab your candy coating, and follow the directions on the package for melting.

?
I got mine at Walmart, but you can also find these in most craft supply stores.

I melt both packages together in the microwave in a medium glass bowl, but I follow the melting instructions on the package EXACTLY. Do not try to rush it, because they will seize up and become grainy – a.k.a. totally unusable. YOU WILL HAVE TO THROW THE WHOLE BATCH OUT. Just follow the instructions. I know it’s annoying. I know it seems like they will never melt on low power. I know it takes forever.

Just trust. OK? Good.

Dump the candy into your microwave safe bowl.

?

Follow the melting instructions. Pull it out and stir it well in-between each interval in the microwave.

?

Oh look! It is finallyyyy starting to melt.

?

Getting closer….Don’t give up now!

?

Thank God that finally happened. It is melted. Sheesh. Now add a splash of vegetable oil to the melted candy to thin it out a bit, and mix well. Grab your cake pops out of the fridge and start dipping! Try to swirl the pop out of the candy, so that it makes a more moon-like effect.

?

(I know this is blurry. Cody was gone on a business trip. I was dipping and swirling and trying to take pictures while the kids were running amok in the only-2-days-before-party-mayhem. Just be happy you even have this picture.)

?

As you dip them, place them back on the parchment paper. If the candy starts to get too thick, put it back in the microwave on low power for 15 second intervals until it is nice and melted again. You can also add another splash of vegetable oil to thin it out. Once they are all dipped and swirled, pop them back in the fridge until party time!

?

That tray was full of cake pop moons about 3 seconds before this picture was taken! Hopefully you can get a nice picture of yours before the minions attack and devour!

Enjoy!

🙂 Kaitlyn

How To Make Your Own “Minion” Pinata!

Kids love pinatas! Just something about whacking the crap out of a container full of candy until it breaks is magical. I have yet to meet a child that doesn’t absolutely go nuts over this. I always have one at my girls’ birthday parties. The price tag, however, does not agree with me. Most pre-made character pinatas run about $25. I might as well hang up my $25 and whack it to shreds with a stick, because that is such a huge waste of money!!!

Especially when you can make your own pinata for literally pennies.

Yep. I said pennies.

Want to know how to do it? Read on below!


How To Make Your Own “Minion” Pinata:

Before embarking on this adventure, plan ahead! While this is a super-easy process, you need to start making your pinata about 5 days before your party because he needs a couple nights to dry. (In other words, you have to go buy a $25.00 pre-made pinata if your party is tomorrow. Sorry. This is just not something that can be rushed.)

  • Step 1:

Gather your supplies. You will need:

  • 2 balloons (It doesn’t matter which color because they won’t show.)
  • Some poster board
  • Tape
  • Newspaper, torn (not cut) into strips. (I just use the weekly sale ads that come in the mail for free.)
  • Flour
  • Water
  • String or rope (I used black parachute cord)
  • Assorted candy/small prizes of your choice
  • Spray paint in blue and yellow
  • Black pipe cleaners
  • Acrylic craft paint in white, black, and silver

 

  • Step 2:

Assemble the paper mache mold.

Inflate the two balloons, and cut the poster board into smaller pieces.

?

Line your poster board up into one big strip, and tape it all together.

?

Tape the 2 balloons together at the bottom.

?

Roll the balloons up in the poster board, attaching with tape as you go.

?

You might need a little helper to hold it still while you finish up the taping. 🙂

?

  • Step 3:

Prepare your paper mache station.

?

You need to mix the paper mache. For each coat you will need:

  • 1 cup all-purpose flour
  • 1 cup water

Combine the flour and water until it is a nice, smooth paste. You should make sure you have plenty of newsprint torn into strips and your assembled mold ready to go. I didn’t cover my work space, because as long as you clean up while the paste is still wet it wipes off easily. If you are worried about the mess, then cover your work space with a plastic tablecloth or some extra newspaper.

  • Step 4:

Get your hands dirty, and start paper macheing!

?

Dip each strip of newsprint into the paste, run your fingers down it to wipe off the excess paste, then smooth it onto your mold. Repeat the process with each strip. Remember to saturate each piece, but wipe off as much of the extra paste as possible. If you use too much it will take forever to dry and could saturate the poster board, which will make your minion look warped.

?

Cris-crossing the strips makes a strong pinata. If you lay all the strips going the same direction, it will end up having weak spots.

?

Continue laying strips until you have no more openings. The entire piece should be covered in your first layer of paper mache, without being able to see any poster board or balloons. Resist the urge to keep paper macheing. If you make your first coat too thick it will take forever to dry. Let dry overnight.

?

Once dry, it will look like the picture above. Repeat the paper mache process and do a second coat over the entire piece. Allow the second coat to dry overnight again. If you are making the pinata for a large group of children or bigger kids, I recommend doing a third coat as well. If you have a smaller group or just little kids, 2 coats should be strong enough. (Remember to make sure you leave enough dry time between coats – overnight is best!)

  • Step 5:

Fill him up with candy and prizes!

When deciding what to fill your pinata with, consider your crowd. Little kids? Go with stickers and fruit snacks. Big kids? A good candy combo. Does anybody have allergies? Make sure your candy doesn’t contain nuts. So now that you have your treats picked out, let’s fill him!

?

Using a sharp knife, poke a hole into what will be the top of your pinata. Do not be alarmed when you hear the balloon begin to deflate inside! As long as you applied at least 2 coats of paper mache and allowed your pinata to dry properly, it will be very sturdy and hold it’s shape. Using a sawing motion with your knife, cut a flap big enough to fit your hand inside.

?

Deflate the other balloon, and pull the balloons out. These are a choking hazard. It is OK to leave the poster board inside. Dump all your candy and prizes inside. Now is also a good time to poke holes and attach the string your pinata will hang from. Poke 3 SMALL holes, surrounding the candy opening. Since my pictures for this didn’t turn out, I made you a diagram below. Pinata diagram

Thread the string through each hole from outside to inside. Reach your hand inside and tie the end of each string into a giant knot, so that it can’t come back through the hole. Here is another #madpaintskillz diagram for you:pinata diagram 2

Once your candy is inside and the strings are attached for future hanging, close the flap back up with masking tape. Do one layer of paper mache over this entire top section to seal everything back up nice and cozy. Allow to dry – you guessed it – overnight.

  • Step 6:

Turn him into a minion!

Kait phone 73115 210

Get your future minion, spray paint and a tarp. Spray the entire guy yellow. Apply multiple coats as needed, because your first coat will soak right into the paper mache. Mine took 2 full coats to cover the newspaper.

?

Allow to dry at least 2 hours, then tape off his top half. I just used masking tape and construction paper, because that was handy at the moment.

?

Spray his bottom half blue. Mine only took 1 coat of blue to be covered. Allow to dry another 2 hours.

?

Remove the paper and tape, and bring him inside to put his face on!

?

Use white craft paint for the eyes, and outline with silver craft paint for the goggles. Use the black craft paint to make his pupils, band for his goggles and a smiley mouth! Allow to dry. Then cut a small slit in the top of his head using a sharp knife. Poke pieces of black pipe cleaner into the slit, and bend them to resemble minion hair.

  • Step 7:

Hang him up and get the party started! The pinata rules we follow are:

  • Treat bags for candy/prize collection are labeled with names and passed out before the pinata starts
  • Birthday kid goes first
  • The other kids follow in age order from youngest to oldest
  • Each kid gets 3 hits, missed swings don’t count
  • Once the pinata breaks, it is every man for himself
  • I always keep some extra candy/prizes to the side in case some little kids get boxed out and don’t get to grab any candy

?

?

?

Be ready for the chaos once he breaks! Ahhhh! So fun!

?

Aren’t you glad that didn’t cost you $25.00?!


 

Have fun, you party animals!

🙂 Kaitlyn

 

How to Make Your Own “Despicable Me” Party Banner

I love cute banners at kids’ parties! They just add so much to the decoration factor. I especially love them when they are personalized! The only downfall to a personalized banner is spending the money. Maybe I am just cheap, but it costs waaaay too much to order one. I am literally going to have this thing hanging in my house for the 3 short hours a kid’s party lasts, and it is going to cost me $30.00?! That’s like paying the banner $10 an hour to just hang out and look pretty! The easy way around is this to make your own. The supplies cost under $10 for everything – even less if you use some craft supplies that you already have. Bonus mom points: Your kids can help you make it, and feel extra special when they look around their party at the cool decor the contributed. They get so excited, and it’s super cute!

Want to know how to do it? Follow the instructions below!


 

How to Make Your Own “Despicable Me” Party Banner

Step 1:

Gather your supplies.

?

You will need:

  • Fun foam in 2 colors of your choice. I chose yellow and blue since our party had lots of minions, so yellow and blue went best with our take on the “Despicable” theme.
    • I like making banners from fun foam. It doesn’t curl in outdoor humidity, and can even withstand a rain shower or getting splashed from the pool. (You can substitute regular poster board if you know your banner won’t get wet or the party will be inside.)
  • String or ribbon of your choice
    • I used black parachute cord because I had some left over from other crafts. Any kind of string, yarn or ribbon will work, but keep in mind it will show so you want it to match.
  • A ruler
    • I have a measuring tape pictured above, mainly because I couldn’t find my ruler. Craft supplies literally disappear and reappear at their own will around here.
  • Scissors
  • Elmer’s glue
  • Sticker letters
    • You can find these at any craft supply store. They are a little pricey, but I use them for a lot of random crafts so I grab them at Michael’s with a 40% off coupon when I have one.
  • Minion stickers
    • Totally optional, but the more minions we had at our party the better!

STEP 2:

Decide what you want your banner to say, and how you want it to be displayed.

  • You will have 1 letter per triangle piece on your banner, so you need to decide this before you start to cut everything out. Since the party was a “Despicable Me” theme and Emmy was turning 3, I thought a banner saying “DESPICABLE THREE” would be cute. I decided that it would say “DESPICABLE” on the top line and “THREE” on the bottom line with 2 extra blue triangles on each side for Emmy to stick minion stickers. So I knew I would need to cut out 15 yellow triangles and 17 blue triangles.

?

STEP 3:

Measure and cut out your banner pieces.

  • I chose just regular triangles for my banner pieces because they are easy. You are going to want to size your triangles based on the size of letters you have. Since the letters I had were 2 inch letters, I made the top triangles 3 inches wide at the top and 4 inches long from the top to the bottom tip of the triangle.

?

?

  • Then I followed the same process with the bottom triangles. I wanted about a half inch of the bottom blue triangles to show, so I made them 1 inch bigger. They ended up being 4 inches wide at the top and 5 inches long from the top to the bottom tip of the triangle.

?

?

STEP 4:

Glue the pieces together.

  • Apply a decent amount of Elmer’s glue to the back of the yellow triangle. Then stick the 2 triangles together.

?

  • Instead of centering the yellow I dropped it down a little bit so that I had some extra room to thread the parachute cord through the top later. Keep gluing all the pieces together until you have all 15 done.

?

Step 5:

Allow them to dry for a couple hours.

?

STEP 6:

Stick on your letters.

?

  • The brand I use is called “mambiSTICKS”. I have used them on countless craft projects. You can find these at Michael’s for $7.99 per pack or get them cheaper with a coupon! Gotta love those 40% off coupons!

Kait's phone 7-21-15 1260

  • Carefully stick the letters on the center of each banner piece. A couple of the letters hung over the edge of the yellow towards the bottom point of the triangle. (You can kind of see what I mean on the letter “h” above.) I used scissors to just trim the little end that didn’t fit. If you want to avoid running into this, just make your triangles a little bigger in step 3.
  • This is also when I had Emmy stick her minion stickers of choice onto the 2 blank triangles next to the “THREE”.

STEP 7:

Now it is time to assemble your banner!

  • Poke a very small hole (I just use the tip of my scissors) in the 2 top corners of each triangle. The hole should be small enough that the fun foam will hold tight on the cord once it’s threaded (it shouldn’t be able to slide around on it’s own), but you should be able to gently slide the piece along the thread without any problem. I don’t have pictures of how to thread the cord, because I was home by myself with 2 crazy kids and needed both hands to do this task. I did draw you a handy diagram with my mad paint skills. Here it is:

banner pic

  • The cord should come up through the hole on the left, run across the top, and go back through the hole on the right. Do each piece for the top row of the banner, in “DESPICABLE” order, and leave plenty of extra cord on each end for hanging. Repeat for the bottom row, on a new, separate string. Do one minion sticker triangle, followed by “THREE”, and finish with the other minion sticker triangle.

STEP 8:

Hang her up!

  • When it is time to hang the banner, I recommend doing the top row first. Make sure it is centered, and do not let it droop too much because you have another row that will be beneath it. Hang the bottom row next. Gently adjust the letters so that everything is centered and evenly spaced. Then take a step back and admire your cute little banner that is all yours for less than $10.00!

?


 

PARTY TIME!!!

😉 Kaitlyn